---
description: Bridge your tokens anywhere!
---

# Bridge

Have you purchased **FLURRY** on one chain, and you want to move it to other chains for yield? Then the **Flurry Bridge 🌉** comes in handy! Simply bridge tokens through our **Cross-Chain** Bridge service in matter of seconds.

Portal to **Flurry Bridge**:

{% embed url="https://app.flurry.finance/bridge" %}
Bridge your FLURRY or rhoTokens to designated chains!
{% endembed %}

{% hint style="success" %}
**Flurry Bridge** is now live on **Ethereum**, **BNB Chain** & **Polygon** (MATIC); however, bridging from any network chain to Ethereum mainnet is not available yet.
{% endhint %}

{% hint style="success" %}
**Bridge** also works on **Testnets** (Ropsten Testnet & BSC Testnet)**.**
{% endhint %}

{% hint style="info" %}
**Only $FLURRY is supported for now. We will expand our Cross-Chain support to cover the rhoTokens.**
{% endhint %}

## How to Bridge your tokens?

### 1. Connect Your Wallet

Head to [https://app.flurry.finance/bridge](https://app.flurry.finance/bridge) and connect your wallet on the corresponding network.

You will land on a page as displayed below, the numbers will be shown as below.

In this walkthrough, we will use BSC Testnet as Origin chain (indicated as _**From**_) and Ropsten Testnet as the Destination chain (indicated as _**To**_), and **FLURRY** will be used as the bridging token.

![\*Numbers and figures reflected are based on the Flurry testnet, not the mainnet.](https://480282750-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MgsDYcYxDEhYbYCg_9V%2Fuploads%2F0KoHhClkeuCJDbN06m4J%2FBridge%201.png?alt=media\&token=58a40a69-3677-43c4-b079-6d303cca486a)

### 2. Key an amount and Approve your token

Before you start using the Flurry DApp, there is a step that you should take first after entering the amount, which is to approve an AMOUNT that the Flurry Protocol can get access to on your wallet.&#x20;

It's like the setting on your phone - you have to grant access to the application before the application can use your camera or microphone. The principle works the same on DeFi protocols.&#x20;

One point to note is that if you have only approved 50 FLURRY but you try to bridge 100 FLURRY, the transaction won't be able to process.

* Make sure you have approved the exact amount or more that you wish to bridge.
* The approval step will cost some gas fee, as this is the beauty of decentralized space - you need consensus to approve it.
* Once you've connected your wallet, you can click the eye next to "Available balance" and see the full amount you have in your wallet.&#x20;
* Check to see if the currency unit is what you want to bridge (100 FLURRY here).

The "Enter an amount" button will change to "Approve FLURRY" (or the bridging token) after you enter a desired amount for bridging.

![\*Numbers and figures reflected are based on the Flurry testnet, not the mainnet.](https://480282750-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MgsDYcYxDEhYbYCg_9V%2Fuploads%2FaCFqd9RchRxnc3uU1s0H%2FBridge%201A.png?alt=media\&token=999afb81-c434-4774-8803-bccb6b7b0c61)

### 3. Hit the "Swap Now" button to bridge tokens!

Once the token is approved, the "Approve FLURRY" (or the bridging token) button will change to "Swap Now".&#x20;

Now key in the wallet address you want to bridge to (default as the same address you connect with the Flurry DApp).

&#x20;Finally, you can hit "Swap Now" to start bridging your tokens!

![\*Numbers and figures reflected are based on the Flurry testnet, not the mainnet.](https://480282750-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MgsDYcYxDEhYbYCg_9V%2Fuploads%2FZWLLCYfqyG47U1PdEJxK%2FBridge%202.png?alt=media\&token=da25949a-f082-44d6-b65e-423bd861e97e)

A wallet notification will pop up for you to confirm the bridge transaction (check if it is the "BRIDGE TOKEN AT" action as shown in the green box), press the **"Confirm"** button and here you go.

![\*Numbers and figures reflected are based on the Flurry testnet, not the mainnet.](https://480282750-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MgsDYcYxDEhYbYCg_9V%2Fuploads%2FMrKZ2CbV8d36OkUcHM5X%2FBridge%204.png?alt=media\&token=9cf98c18-4826-4466-be75-da3ae0e1e5f9)

The bridging process will take some time as it is a Cross-Chain smart contract interaction, patience is all you need when transaction is queuing!

![\*Numbers and figures reflected are based on the Flurry testnet, not the mainnet.](https://480282750-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MgsDYcYxDEhYbYCg_9V%2Fuploads%2FwmxDMUB40u7n8pc7ofxK%2FBridge%205.png?alt=media\&token=4bf2bbb7-dcdc-431b-b0cf-590ede1e6058)

After token is successfully bridged, you should be able to see another notification pop-up showing "Bridge - Swap" from the Origin chain to the Destination chain.

![](https://480282750-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MgsDYcYxDEhYbYCg_9V%2Fuploads%2FGI4ngt1pl9tUydYP11bc%2FBridge%203.png?alt=media\&token=3a92ada4-f33c-483c-8b86-18d47ce3a7ca)

### 4. Your tokens have been bridged!

With your token amount bridged, you can see the reduced amount in the current (Origin) chain.

![\*Numbers and figures reflected are based on the Flurry testnet, not the mainnet.](https://480282750-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MgsDYcYxDEhYbYCg_9V%2Fuploads%2FmepeWX75VycbZnajYh1o%2FBridge%207.png?alt=media\&token=a0bfc5f5-5141-4461-910a-e85e4ddb2a8a)

### 5. Swap to the Destination chain to check the bridged token

To check your bridged amount of token, switch to the Destination chain. Confirm switching the chain by "Switch Network" in your wallet.

![\*Numbers and figures reflected are based on the Flurry testnet, not the mainnet.](https://480282750-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MgsDYcYxDEhYbYCg_9V%2Fuploads%2F6U6pxWK1HhcaPQOkUiaI%2FBridge%208.png?alt=media\&token=acfaf01e-a1cb-4754-9c48-b9a9671646a3)

Now you can see your successfully bridged tokens (i.e. 100 FLURRY here)!

![\*Numbers and figures reflected are based on the Flurry testnet, not the mainnet.](https://480282750-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MgsDYcYxDEhYbYCg_9V%2Fuploads%2FeZ7egVSAexB2lqV23xMZ%2FBridge%209%20New.png?alt=media\&token=5072a4e1-d622-46bd-8ec0-1c4b77607961)

### Bridging your token in video

You can find a complete guide on the Bridge in the following demo video done on testnet.

{% embed url="https://youtu.be/K1YGIumjq-M" %}
